Helmet cleaning and helmet disinfection machine for 1 helmet

A helmet is protective equipment that is worn directly on the head. During sports, driving, work or training, it naturally holds sweat, moisture, dust, odors and bacteria. It's uncomfortable with your own helmet. For helmets that are borrowed or exchanged between several people, this is an even more sensitive topic.

Helmet cleaning and disinfection machine for 1 helmet offers a modern hygienic solution for operations where motorcycle, ski, riding, sports, work or protective helmets are used. The customer simply puts the helmet into the cleaning chamber, selects the program, makes the payment, and the machine takes care of cleaning, disinfection, drying and freshening the scent.

We don't just sell the machine. We offer hygiene solution for shared protective equipment wherever multiple people use one helmet during the day.

Helmet cleaning machine for operations where helmets are rotated between customers

Wherever one helmet is used by several people during the day, there is a need for professional cleaning and disinfection. Typically, these are go-kart halls, ski equipment rentals, bike parks, riding schools, adrenaline centers, sports clubs, industrial operations or training centers.

The vending machine helps solve several practical problems at once:

odor and moisture inside the helmet,
sweat and general dirt from previous use,
higher customer demands for hygiene,
swapping helmets between multiple people,
lack of time for manual cleaning,
need to offer customers an extra service,
opportunity to create a new additional source of income.

A well-placed vending machine can increase customer comfort, improve the perception of traffic, and at the same time show that you really care about hygiene and service quality.

Disinfection of helmets and cleaning of motorcycle helmets without complicated operation

Using the machine is simple. The customer places the helmet in the cleaning chamber, selects the desired program and starts the cleaning cycle. The machine then helps remove odors, moisture and common dirt, dries the helmet, disinfects it and freshens it with a scent.

This model is intended for 1 helmet / 1 helmet and is especially suitable for operations that want to start with this service, test customer interest or do not have space for a larger model.

It is suitable for:

smaller and moderately busy operations,
rental of helmets and protective equipment,
sports grounds,
go-kart and motorcycle operations,
riding and skiing areas,
fitness, fight and training clubs,
industrial operations with protective helmets.

UV helmet disinfection, drying and fragrance refreshment

The machine works with a cleaning solution, which can be water or a suitable disinfectant. If you use a highly concentrated disinfectant, we recommend diluting it with water according to the manufacturer's recommendations.

During the cleaning cycle, the inside of the helmet is treated, disinfected, dried and scented. Thanks to this, the helmet does not look stale, it is more pleasant to use again and the customer has a better feeling about the whole service.

The single helmet model supports up to 3 different scents, so you can offer customers a more pleasant post-cleaning experience. Smell is a detail that people often remember immediately. After use, the helmet not only looks cleaner, but also fresher.

Helmet disinfection machine with low operating costs

The disinfection tank has volume 5 liters and is usually enough for about 500 cycles. The actual duration depends on the length and settings of the disinfection program. The longer the disinfection cycle, the more disinfectant is used and the fewer cycles the cartridge lasts.

Consumables are primarily:

disinfectant,
water according to the selected mode,
fragrance,
activated carbon filter.

A full-fledged filter with activated carbon is part of the solution. The recommended filter change is every 3 to 6 months depending on usage intensity and environment.

Total operating costs are relatively low, as the machine does not require complex daily maintenance and consumables are mainly disinfectants, fragrances and filters.

Who is the helmet cleaning and disinfection machine suitable for?

The machine is suitable for all operations where helmets and protective helmets are reused, loaned to customers or rotated between several people.

Motorsport and motorcycle helmet cleaning

karting halls,
kart circuits,
racing schools,
autodromes,
motorcycle schools,
motorbike rentals,
scooter rentals,
ATV rentals,
enduro centers,
motocross grounds.

In motorsport, helmets are often rotated between customers, they get steamy quickly and odor is a very common problem. A motorcycle helmet cleaning machine can be a service that customers appreciate immediately.

Ski resorts and disinfection of ski helmets

ski resorts,
ski rental,
snowboard centers,
cross-country skiing centers,
children's ski schools,
snow parks.

Hygiene is a very sensitive topic at ski helmet rentals. Disinfecting ski helmets can increase customer confidence and elevate the rental business to a more professional level.

Cycling, bike parks and cleaning sports helmets

bike parks,
downhill centers,
electric bike rentals,
mountain bike rentals,
urban bikesharing projects,
BMX campuses.

Cycling and downhill helmets get affected by sweat, dust and intensive use. The vending machine can be a practical service for rental companies and sports facilities.

Riding schools and disinfection of riding helmets

riding schools,
riding stables,
pony clubs,
hyporehabilitation centers,
sports stables,
parkour areas,
western ranch centers,
tourist rides on horses.

In riding establishments, helmets are often rented to beginners, children or visitors to rides. This is where the professional disinfection of riding helmets can look very credible and improve the overall impression of the operation.

Martial arts and helmet cleaning

MMA gyms,
kickboxing clubs,
boxing squads,
Muay Thai centers,
taekwondo clubs,
karate school,
krav maga centers.

In combat sports, protective helmets are often used during sparring and training. Sweat, odors and shared equipment are a common theme in these operations. A machine for disinfecting protective helmets can be part of better club hygiene.

Adrenaline centers and disinfection of protective equipment

zipline center,
rope centers,
via ferrata parks,
climbing centers,
jump towers,
bungee centers.

For adrenaline activities, customers often rent equipment on site. A clean and fresh helmet increases the comfort and confidence of the customer.

Industry and cleaning of work protective helmets

construction companies,
smelters,
mines,
logistics centers,
manufacturing plants,
power plants,
refinery,
ports.

In industrial operations, regular cleaning of protective helmets may be part of an internal hygiene, BOZP program or employee care. The machine can help especially where protective equipment is used daily and in large numbers.

Security forces and training centers

firefighters,
volunteer firefighters,
police training centers,
army,
city police,
prison service.

In these operations, protective equipment is used intensively and often under specific conditions. Disinfection of helmets and hard hats can be part of regular equipment maintenance.

Entertainment industry, children's attractions and shared helmets

paintball,
airsoft,
laser game,
VR arenas,
theme parks,
children's centers,
children's karts,
children's quad bikes,
children's transport parks,
snow tubing,
adventure parks.

Here, helmets are often exchanged between dozens of people a day. This is precisely why the helmet cleaning and disinfection machine can be a strong argument for parents, customers and operators.

Water sports, hiking and outdoor equipment

rafting centers,
canoe rentals,
wake parks,
hydrospeed centers,
canyoning,
via ferrata equipment rental,
mountain centers,
speleological attractions,
cave exposition.

In a humid environment, helmets and protective equipment steam quickly and can smell. Regular cleaning and drying can improve customer comfort and equipment life.

If you are dealing with odors, moisture or shared helmets in traffic, we recommend also reading the article Helmet disinfection and helmet hygiene in practice.

Indoor helmet cleaning machine

This model is intended for indoor use. We do not recommend its operation outdoors, where the device could be affected by rain, moisture, direct sunlight, frost or significant temperature fluctuations.

Suitable location:

in the store,
at the entrance to the rental office,
in the reception of the sports complex,
in the background of the karting center,
at a riding school or riding school,
in the ski rental,
in the covered hall,
in the showroom,
in the self-service zone.

We will be happy to advise you on the selection of a suitable location according to the specific operation.

Helmet cleaning machine payment options

The machine can be equipped with a payment solution according to the specific configuration and requirements of the operator.

Possible payment options:

payment card,
cash payment as configured,
token system by configuration.

We will recommend a specific payment solution depending on where the machine will be located, what type of customers will use it and how you want to operate the service.

Model calculation of return on investment for a helmet cleaning machine

Return on investment depends on several factors. The location of the machine, traffic, visibility of the service, seasonality, price per cycle, marketing support and whether the staff actively offers the service to customers are mainly important.

The following calculation is only indicative model example. This is not a guaranteed result. Actual sales and returns may vary based on specific traffic.

For the model, we calculate the purchase price of the machine 119 000 CZK without DPH.

Model example of sales at the price 80 CZK for one helmet cleaning

Approximate return on investment at the price of the machine 119 000 CZK without DPH

The calculation does not take into account DPH, tax implications, costs of consumables, service costs, payment fees or any costs of placing or promoting the service. It serves only as a simple reference model to give an idea of ​​how the machine can work with different number of uses.

Model example of operating costs

The disinfection tank has volume 5 liters and is usually enough for about 500 cycles. The actual consumption depends on the setting of the program length and the amount of disinfectant used.

This can keep operating costs relatively low, especially if the machine is placed in a highly visible location and the service is clearly communicated to customers.

How to increase the use of the helmet disinfection machine

The biggest mistake would be to put a vending machine in a corner somewhere and expect people to find it themselves. If the device is to earn money and be actually used, it must be seen.

We recommend:

place the machine in a frequented place,
visibly mark the price and benefit of the service,
use custom branding and clear graphics,
train staff to actively offer service to customers,
complete the information sign at the rental office or reception,
communicate the service on the establishment's website and social networks.

The better the customer understands why they should benefit from helmet cleaning, the higher the number of cycles can be.

We will provide customized branding for the helmet cleaning machine

The vending machine doesn't have to look like a universal device with no identity. We can arrange the branding of the machine directly for you - from graphic design to final sticker according to your brand, establishment or specific campaign.

We can prepare sticker with your logo, company colors, communication texts, icons or advertising graphics, so that the machine acts as a natural part of your space. This makes it not only a practical helmet cleaning device, but also a visible marketing element that supports your brand right at the point of operation.

Branding can be customized for, for example, a motorcycle center, a rental shop, a sports complex, a karting center, a riding school, a ski resort, a showroom or a company operation. All you have to do is provide us with a logo and a basic idea, or we will help you with the design completely from the beginning.

Helmet cleaning machine installation and commissioning

In order to operate the machine, it is necessary to ensure a suitable indoor location, a solid and level surface, a connection to the electrical network and, depending on the configuration, an Internet connection.

Before delivery we can go over with you:

suitable location in operation,
customer type,
intended use,
payment solution,
branding options,
operational settings of the service,
recommended communication towards customers.

The goal is for the machine to make sense not only technically, but mainly commercially.

Helmet disinfection machine service and post-purchase support

The machine is designed with regard to simple operation and low costs of consumables. For long-term reliable operation, we recommend regularly replenishing the disinfectant and fragrances, checking the cleanliness of the device and changing the activated carbon filter approximately every 3 to 6 months depending on usage intensity and environment.

We provide service and support directly. So it is not just a one-time sale of equipment, after which you are left alone. We are available to you even after the purchase - we will advise on operation, maintenance, settings, consumables and possible service.

Our goal is for the machine to really work in your operation, be usable by customers and make sense in the long term. Before and after delivery, we can discuss with you the appropriate location, frequency of refilling, recommended maintenance or adjustments to operating settings.

Technical parameters of the machine for cleaning and disinfecting helmets

Model
Helmet cleaning and disinfection machine for 1 helmet

Capacity
1 Helmet / 1 Helmet

Usage
interior

Display
12,1" touchscreen

Width
660 mm

Height
1966 mm

Depth
600 mm

Weight
160 kg

Cleaning solution
water or disinfectant

Disinfection tank volume
5 liters

Refill Duration
approximately 500 cycles according to the disinfection program settings

Fragrance
up to 3 different scents

Filtering
activated carbon filter

Filter replacement recommended
every 3 to 6 months

Maximum power
2 100 W

Consumables
disinfection, fragrance, activated carbon filter

Certification
CE

Payment options according to configuration
payment card, cash payment, token system

Branding
we will provide custom stickers and graphic customization

Service
we provide service and support after purchase

What can be included in the helmet cleaning machine?

The specific scope of delivery depends on configuration and agreement. It is usually possible to solve:

vending machine delivery,
payment system settings,
consultation on suitable location,
basic operating recommendations,
branding or custom sticker,
service support,
consumables recommendations,
help with setting up the service business model.

We will prepare the exact scope of delivery according to your requirements and type of operation.

Are you considering a helmet cleaning machine for your operation?

If you have an operation where helmets are used regularly, loaned to customers, or rotated between multiple people, a single helmet model may be a reasonable first step. It does not require as high an investment as a larger solution, yet it will offer customers a service that they often cannot find with competitors.

Don't wait for a shop next to you to offer a similar hygiene solution. Write us or call us. Together we will discuss whether the machine is right for you, where it is best to place it, how to set the price for use and how to turn it into a service that will not just stand in the corner, but really work for your operation.